1.Do you have radiation-resistant materials for use in radiation environments?

We offer materials specially developed for radiation environments, featuring good radiation-resistant performance.

2.What is the opening ratio?

The opening ratio of our products includes 65:35, 75:25, 80:20.

3.What is the MOQ?

It depends on whether we have suitable product in stock or the output of one set of raw material.

4.Do you have service of coupling fiber optic plate/fiber optic inverter/fiber optic taper with CCD or CMOS?

Yes. We can help to couple fiber optic plate/fiber optic inverter/fiber optic taper with CCD and CMOS.

5.What is the maximum magnification of fiber optic taper can you make?

The maximum magnification of fiber optic taper we can make is 10:1. But it is also depends on the diameter. At the same time, with such large magnification, the resolution and transmission will be not good.

6.How thin or thick can the fiber optic plate be made?

The minimum thickness of fiber optic plate we can make is 0.2mm. It is also depends on the size of the FOP. The maximum thickness can be as thick as the customer need.

7.How large can the fiber optic plate/fiber optic inverter/fiber optic taper be made?

The largest fiber optic plate we can make is 550*350mm. The largest size that can be mass-produced is 150*150mm. The maximum diameter of fiber optic inverter we can make is 60mm. And the maximum diameter of fiber optic taper we can make is 65mm.

8.What is the delivery time of fiber optic plate/fiber optic inverter/fiber optic taper?

Generally, the lead time of fiber optic plate is 35 workdays, lead time of fiber optic inverter and taper is 45 workdays. But it also depends on the quantity.

9.How much does the fiber optic plate/fiber optic inverter/fiber optic taper cost?

This question can only be answered once we know the desired size and specifications of your demand. Armed with this information we'd be glad with a volume estimation for the price.

10.What fiber size (pitch) can you make?

The most common fiber size we can make is 4um, 6um and 100um. We also also make fiber size of 10um, 50um, and 70um.

11.What is Numerical Aperture and viewing angle of fiber optic plate?

We have different material of FOP. The common NA of our products is 1.0 and 0.8. The viewing angle of FOP with NA 1.0 is 90 degrees one side. The viewing angle of FOP with NA 0.8 is about 60 degree one side. We also have FOP with low NA, such as 0.2 and 0.45. The NA can also be researched according to customers’ demand.

12.What is the themal expansion coefficient of fiber optic plate/fiber optic inverter/fiber optic taper?

（25～460℃）：（87±5）×10-7/℃

13.Are the products environmentally friendly?

Yes. Now all our products are lead-free.

14.What is the working temperature of fiber optic plate/fiber optic inverter/fiber optic taper?

The temperature resistance range of glass fiber FOP products can reach up to 550 ℃. FOP can operate within the range of -30 ℃ to normal ambient temperature. But because it is made of glass, it is important to avoid sudden changes in temperature, which can easily cause the product to break.

15.Can you offer customized fiber optic products?

We customize products according to our customers’ requirements no matter in dimensions and specifications.

16.Do you develop and produce the products in house?

Yes, from the design the recipe of the glass, to the final mechanical processing, quality control.

17.What wavelengths does fiber optic plate/fiber optic inverter/fiber optic taper operate at? Can ultraviolet and infrared light be transmitted through FOP?

It can generally transmit the visible light from 380nm to 780nm and the infrared light from 780nm to 900nm. Ultraviolet glass can not be tranmitted through FOP.

18.What is the material to make fiber optic plate/fiber optic inverter/fiber optic taper?

It is a borosilicate glass series independently developed by our company Three sets of glass are used, including core glass, cladding glass, and black glass.